NAVIGATION ANTENNA REMOVAL

PROCEDURE


  1. PRECAUTION

    Note

    After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work Click here.

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    CAUTION:

    Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  3. REMOVE UPPER INSTRUMENT PANEL SUB-ASSEMBLY


    1. Remove the upper instrument panel Click here.

  4. REMOVE NAVIGATION ANTENNA ASSEMBLY (for LHD)


    1. A0054QA

      Detach the claw and clamp.

    2. Remove the 2 screws and antenna.

  5. REMOVE NAVIGATION ANTENNA ASSEMBLY (for RHD)


    1. A0057BO

      Detach the claw and clamp.

    2. Remove the 2 screws and antenna.