NAVIGATION ECU INSTALLATION

PROCEDURE


  1. INSTALL NAVIGATION ECU


    1. Connect the connector to install the antenna cord sub-assembly.

    2. Attach the clamp.

    3. A0058P6E01
      Text in Illustration
      *1 Boss

      Align the 2 positioning bosses of the navigation ECU with the hole in the radio and display receiver assembly, and then place the navigation ECU on the radio and display receiver assembly.

    4. Connect the antenna cord sub-assembly connector.

    5. Connect the 4 connectors to install the No. 1 navigation wire.

  2. INSTALL NO. 2 RADIO RECEIVER BRACKET


    1. Install the No. 2 radio receiver bracket with the 5 screws.

      Torque:
      4.0 N*m  { 41 kgf*cm, 35 in.*lbf }

  3. INSTALL NO. 1 RADIO RECEIVER BRACKET


    1. Install the No. 1 radio receiver bracket with the 5 screws.

      Torque:
      4.0 N*m  { 41 kgf*cm, 35 in.*lbf }

  4. INSTALL AIR CONDITIONING CONTROL ASSEMBLY

    Click here

  5. INSTALL RADIO AND DISPLAY RECEIVER ASSEMBLY

    Click here