FRONT DOOR SPEAKER INSPECTION

PROCEDURE


  1. INSPECT FRONT NO. 1 SPEAKER ASSEMBLY (for 6 Speakers)


    1. A0054OSE27
      Text in Illustration
      *1

      Component without harness connected

      (Front No. 1 Speaker)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      1 - 2 Always 4 Ω

      If the result is not as specified, replace the front No. 1 speaker assembly.

  2. INSPECT FRONT NO. 1 SPEAKER ASSEMBLY (for 11 Speakers)


    1. A0056P1E04
      Text in Illustration
      *1

      Component without harness connected

      (Front No. 1 Speaker)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      1 - 2 Always 2 Ω

      If the result is not as specified, replace the front No. 1 speaker assembly.