RADIO RECEIVER REMOVAL

PROCEDURE


  1. PRECAUTION

    Note

    After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work Click here.

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  3. REMOVE NO. 2 INSTRUMENT CLUSTER FINISH PANEL GARNISH

    Click here

  4. REMOVE INSTRUMENT PANEL FINISH PANEL END RH

    Click here

  5. REMOVE CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY

    Click here

  6. REMOVE RADIO RECEIVER ASSEMBLY WITH BRACKET (for Radio Receiver Type)


    1. A00553R

      Remove the 4 screws.

    2. A0056B9

      Pull the radio receiver to detach the 2 clips on the backside of the radio receiver with bracket.

    3. Disconnect the connectors and remove the radio receiver with bracket.

  7. REMOVE RADIO AND DISPLAY RECEIVER ASSEMBLY WITH BRACKET (for Radio and Display Type)


    1. A0052JV

      Remove the 4 screws.

    2. A0056M2

      Pull the radio and display receiver to detach the 6 clips on the backside of the radio and display receiver assembly with bracket.

    3. Disconnect the connectors and remove the radio and display receiver assembly with bracket.

  8. REMOVE AIR CONDITIONING CONTROL ASSEMBLY


    1. for Radio Receiver Type:


      1. A00557C

        Remove the 2 screws.

      2. Detach the claw and remove the air conditioning control assembly.

    2. for Radio and Display Type:


      1. A00558H

        Remove the 2 screws.

      2. Detach the claw and 2 guides and remove the air conditioning control assembly.

  9. REMOVE NO. 1 RADIO BRACKET (for Radio Receiver Type)


    1. A00543G

      Remove the 3 screws and No. 1 radio bracket.

  10. REMOVE NO. 1 RADIO RECEIVER BRACKET (for Radio and Display Type)


    1. A0053AK

      Remove the 3 screws and No. 1 radio receiver bracket.

  11. REMOVE NO. 2 RADIO BRACKET (for Radio Receiver Type)


    1. A0052OJ

      Remove the 3 screws and No. 2 radio bracket.

  12. REMOVE NO. 2 RADIO RECEIVER BRACKET (for Radio and Display Type)


    1. A00562F

      Remove the 3 screws and No. 2 radio receiver bracket.