FRONT SEAT INNER BELT ASSEMBLY REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

PROCEDURE


  1. REMOVE FRONT SEAT ASSEMBLY LH

    Tech Tips

    Use the same procedure described for the RH side.


    1. for Manual Seat:

      Remove the front seat assembly LH Click here.

    2. for Power Seat:

      Remove the front seat assembly LH Click here.

  2. REMOVE SEAT SLIDE POSITION SENSOR PROTECTOR (for Driver Side)


    1. for Manual Seat:

      Remove the seat slide position sensor protector Click here.

    2. for Power Seat:

      Remove the seat slide position sensor protector Click here.

  3. REMOVE FRONT SEAT INNER BELT ASSEMBLY LH (for Driver Side)


    1. for Manual Seat:


      1. B0040QA

        Disconnect the connector.

      2. Detach the 2 wire harness clamps.

      3. Detach the claw and disconnect the connector.

      4. B0040Q4

        Remove the screw.

      5. Detach the 2 clamps to disconnect the wire harness.

      6. B0040O3

        Remove the nut and front seat inner belt assembly LH.

    2. for Power Seat:


      1. B0040MS

        Disconnect the connector.

      2. Detach the 2 wire harness clamps.

      3. Detach the claw and disconnect the connector.

      4. B0040Q4

        Remove the screw.

      5. Detach the 2 clamps to disconnect the wire harness.

      6. B0040O3

        Remove the nut and front seat inner belt assembly LH.

  4. REMOVE FRONT SEAT INNER BELT ASSEMBLY RH (for Front Passenger Side)


    1. for Manual Seat:


      1. B0040I3

        Disconnect the connector.

      2. Detach the 2 wire harness clamps.

      3. Detach the claw and disconnect the connector.

      4. B0040QM

        Remove the screw.

      5. Detach the 2 clamps to disconnect the wire harness.

      6. B0040P9

        Remove the nut and front seat inner belt assembly RH.

    2. for Power Seat:


      1. B0040PC

        Disconnect the connector.

      2. Detach the 2 wire harness clamps.

      3. Detach the claw and disconnect the connector.

      4. B0040QM

        Remove the screw.

      5. Detach the 2 clamps to disconnect the wire harness.

      6. B0040P9

        Remove the nut and front seat inner belt assembly RH.