FRONT SEAT OUTER BELT ASSEMBLY INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

  • A bolt without a torque specification is shown in the standard bolt chart Click here.

PROCEDURE


  1. INSTALL FRONT SHOULDER BELT ANCHOR ADJUSTER ASSEMBLY

    A0054EF

    1. Align the claw with the adjuster positioning hole and install the adjuster with the 2 bolts.

      Tech Tips

      First install the lower bolt, and then install the upper bolt.

      Torque:
      41 N*m  { 428 kgf*cm, 30 ft.*lbf }

  2. INSTALL FRONT SEAT OUTER BELT ASSEMBLY

    Note


    • When installing the retractor, make sure the claws of the vehicle (labeled "a" in the illustration) only contact the installation areas of the retractor.

    • Align the seat belt positioning holes with the claws and install the retractor of the seat belt with the bolt as shown in the illustration.


    1. A00577WE02
      Text in Illustration
      *1 Bolt A
      *2 Bolt B

      Install the seat belt with the 2 bolts.

      Tech Tips

      First install bolt A, and then install bolt B.

      Torque:
      for bolt A
      5.0 N*m  { 51 kgf*cm, 30 in.*lbf }
      for bolt B
      41 N*m  { 418 kgf*cm, 30 ft.*lbf }
    2. A0058RC

      Connect the pretensioner connector as shown in the illustration.

    3. A0057HK

      Install the shoulder anchor to the shoulder belt anchor adjuster with the nut.

      Torque:
      41 N*m  { 418 kgf*cm, 30 ft.*lbf }

  3. INSTALL CENTER PILLAR GARNISH LH

    Click here

  4. INSTALL LAP BELT OUTER ANCHOR COVER

    Click here

  5. INSTALL LOWER CENTER PILLAR GARNISH LH

    Click here

  6. INSTALL REAR DOOR SCUFF PLATE LH

    Click here

  7. INSTALL FRONT DOOR SCUFF PLATE LH

    Click here

  8. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.