TILT AND TELESCOPIC MANUAL SWITCH INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

PROCEDURE


  1. INSTALL TILT AND TELESCOPIC SWITCH

    A0053BW

    1. Attach the claw to install the switch.

    2. Connect the switch connector.

  2. INSTALL STEERING COLUMN COVER

    Note

    If the steering column cover is installed in an incorrect order, it will not be possible to assemble the steering column cover.


    1. A0057J5

      Attach the claw and 2 pins to install the upper steering column cover.

    2. A0055Z8

      Attach the 2 claws to install the lower steering column cover.

    3. A0055KB

      Attach the 4 claws.

    4. A0056YJ

      Attach the claw.

      Tech Tips

      Press the area around the claw to attach it.

  3. INSTALL LOWER NO. 2 STEERING COLUMN COVER

    A00560Q

    1. Attach the 4 claws to install the lower No. 2 steering column cover.