POWER STEERING ECU(for LHD) INSTALLATION

PROCEDURE


  1. PRECAUTION

    CAUTION:

    Be sure to read Precaution thoroughly before servicing Click here.

  2. INSTALL POWER STEERING ECU ASSEMBLY


    1. A0053LQ

      Install the power steering ECU with the bolt and 2 nuts.

      Torque:
      8.0 N*m  { 82 kgf*cm, 71 in.*lbf }
    2. A0056ZQ
      A0056ZQ

      Connect the 3 connectors to the power steering ECU.

    3. A0059BC

      Connect the connector to the power steering ECU.

    4. As shown in the illustration, return the lock lever to its original position to connect the connector and securely push in the lock of the lock lever.

    5. Attach the wire harness clamp to the power steering ECU.

  3. INSTALL UPPER INSTRUMENT PANEL

    Tech Tips

    Refer to the instructions for installation of the upper instrument panel Click here.

  4. INITIALIZE ROTATION ANGLE SENSOR AND CALIBRATE TORQUE SENSOR ZERO POINT


    1. Initialize the rotation angle sensor and calibrate the torque sensor zero point Click here.