ELECTRIC PARKING BRAKE SWITCH REMOVAL

PROCEDURE


  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    CAUTION:

    Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.

    Note


    • w/ Navigation System for HDD:

      After the ignition switch is turned off, the HDD navigation system requires approximately a minute to record various types of memory and settings. As a result, after turning the ignition switch off, wait a minute or more before disconnecting the cable from the negative (-) battery terminal.

    • When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  2. REMOVE LOWER NO. 2 INSTRUMENT PANEL FINISH PANEL (for LHD)

    Click here

  3. REMOVE LOWER NO. 1 INSTRUMENT PANEL FINISH PANEL (for RHD)

    Click here

  4. REMOVE LOWER CENTER INSTRUMENT PANEL FINISH PANEL

    Click here

  5. REMOVE UPPER NO. 1 CONSOLE PANEL GARNISH (w/ Console Box Lid)

    Click here

  6. REMOVE UPPER NO. 2 CONSOLE PANEL GARNISH (w/ Console Box Lid)

    Click here

  7. REMOVE NO. 3 BOX PANEL (w/ Console Box Lid)

    Click here

  8. REMOVE ELECTRIC PARKING BRAKE SWITCH ASSEMBLY


    1. Disconnect the connector.

    2. A0057ZBE02
      Text in Illustration
      *A for LHD
      *B for RHD

      Remove the 3 bolts and electric parking brake switch.