REAR BRAKE REASSEMBLY

PROCEDURE


  1. TEMPORARILY INSTALL REAR DISC BRAKE BLEEDER PLUG

    Tech Tips

    Tighten the rear disc brake bleeder plug after bleeding any air left in the system.

  2. INSTALL REAR DISC BRAKE BLEEDER PLUG CAP

  3. INSTALL CYLINDER BOOT


    1. A00561ZE01
      Text in Illustration
      *1 Lithium soap base glycol grease

      Apply a light coat of lithium soap base glycol grease to the entire inner and outer circumference of a new cylinder boot.

    2. A0053V7

      Install the cylinder boot to the piston as shown in the illustration.