VACUUM PUMP(for 3ZR-FAE) REMOVAL

CAUTION / NOTICE / HINT

Tech Tips

The vacuum pump assembly is listed as one of the 200000 km (124000 miles) maintenance parts. Make sure to disassemble and inspect it every 200000 km (124000 miles) and replace parts as necessary.

PROCEDURE


  1. REMOVE NO. 2 CYLINDER HEAD COVER

    Click here

  2. REMOVE AIR CLEANER CASE SUB-ASSEMBLY

    Click here

  3. DISCONNECT ENGINE WIRE

    Click here

  4. DISCONNECT UNION TO CONNECTOR TUBE HOSE


    1. A0054PO

      Slide the clip and disconnect the hose.

  5. REMOVE VACUUM PUMP ASSEMBLY


    1. A0055QD

      Remove the 3 bolts and vacuum pump from the engine assembly.

      Note

      As 2 different lengths of bolts are used, make sure to make note of the installation positions.

    2. A0057RJE04
      Text in Illustration
      *1 No. 2 O-ring
      *2 No. 3 O-ring
      *3 Protective Tape

      Using a screwdriver with its tip wrapped with protective tape, remove the No. 2 and No. 3 O-rings from the vacuum pump.

      Note

      Do not damage the groove.