VACUUM PUMP(for 1ZR-FAE, 2ZR-FAE) INSTALLATION

PROCEDURE

1. INSTALL VACUUM PUMP ASSEMBLY

   
   

   1. Apply engine oil to 2 new O-rings.

   2. 

      Install the 2 O-rings to the vacuum pump.

   3. 

      Text in Illustration

      *1	Engine oil

      Apply engine oil to the cylinder hollow.

   4. 

      Install the vacuum pump so that the coupling teeth of the vacuum pump (labeled A) and the grooves of the camshaft (labeled B) are aligned.

      Note

      Be careful not to damage the O-ring.

   5. 

      Install the vacuum pump with the 3 bolts.

      Torque:

      21 N*m  { 214 kgf*cm, 15 ft.*lbf }

      Note

      Confirm that the vacuum pump is not at an angle, and that there is no clearance between the fitting surfaces.

2. CONNECT UNION TO CONNECTOR TUBE HOSE

   
   

   1. 

      Connect the hose with the clip.

      Note

      Make sure that the clip and paint mark are facing upward when connecting the hose.

3. INSPECT VACUUM PUMP OPERATION

   Click here

4. INSTALL ENGINE WIRE (for 1ZR-FAE)

   Click here

5. INSTALL ENGINE WIRE (for 2ZR-FAE)

   Click here

6. INSTALL AIR CLEANER CASE SUB-ASSEMBLY (for 1ZR-FAE)

   Click here

7. INSTALL AIR CLEANER CASE SUB-ASSEMBLY (for 2ZR-FAE)

   Click here

8. INSTALL AIR CLEANER CAP SUB-ASSEMBLY (for 1ZR-FAE)

   Click here

9. INSTALL AIR CLEANER CAP SUB-ASSEMBLY (for 2ZR-FAE)

   Click here

10. INSTALL NO. 2 CYLINDER HEAD COVER (for 1ZR-FAE)

    Click here

11. INSTALL NO. 2 CYLINDER HEAD COVER (for 2ZR-FAE)

    Click here