FRONT BRAKE DISASSEMBLY

PROCEDURE


  1. REMOVE CYLINDER BOOT


    1. A0058GNE01
      Text in Illustration
      *1 Protective Tape

      Using a screwdriver, remove the cylinder boot from the disc brake cylinder assembly.

      Tech Tips

      Tape the screwdriver tip before use.

      Note

      Be careful not to damage the brake piston or cylinder.

  2. REMOVE FRONT DISC BRAKE PISTON


    1. A0058TL

      Place a piece of cloth between the piston and disc brake cylinder assembly.

    2. Apply compressed air to remove the piston from the disc brake cylinder assembly.

      CAUTION:

      Do not place your fingers in front of the piston when using compressed air.

      Note

      Do not allow any brake fluid to spatter.

  3. REMOVE PISTON SEAL


    1. A0053IHE01
      Text in Illustration
      *1 Protective Tape

      Using a screwdriver, remove the piston seal from the disc brake cylinder assembly.

      Tech Tips

      Tape the screwdriver tip before use.

      Note

      Do not damage the inner surface or piston seal groove of the cylinder.

  4. REMOVE FRONT DISC BRAKE BLEEDER PLUG CAP

  5. REMOVE FRONT DISC BRAKE BLEEDER PLUG