REAR AXLE HUB REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedures for the RH side and LH side.

  • The procedures listed below are for the LH side.

PROCEDURE


  1. REMOVE REAR WHEEL

  2. REMOVE REAR DISC BRAKE CYLINDER ASSEMBLY LH


    1. Remove the rear disc brake cylinder assembly LH Click here.

  3. REMOVE REAR DISC

    Click here

  4. DISCONNECT SKID CONTROL SENSOR WIRE


    1. A0057WZ

      Disconnect the connector.

  5. REMOVE REAR AXLE HUB AND BEARING ASSEMBLY LH


    1. A0058VT

      Remove the 4 bolts and the rear axle hub and bearing assembly.