FRONT AXLE HUB BOLT REPLACEMENT

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedures for the RH side and LH side.

  • The procedures listed below are for the LH side.

PROCEDURE


  1. REMOVE FRONT WHEEL

  2. REMOVE FRONT FLEXIBLE HOSE

    Click here

  3. REMOVE DISC BRAKE CYLINDER ASSEMBLY LH

    Click here

  4. REMOVE FRONT DISC

    Click here

  5. REPLACE FRONT AXLE HUB BOLT LH


    1. Temporarily install 2 nuts and 2 washers to the front axle hub bolts as shown in 2 illustration.

    2. A0055L2E02
      Text in Illustration
      *1 Nut

      Using SST and a brass bar or an equivalent tool to hold the front axle, remove the front axle hub bolt.

      SST
      09611-12010
    3. A005925E12
      Text in Illustration
      *1 Washer
      *2 Nut

      Install a washer and nut to a new front axle hub bolt as shown in the illustration.

    4. Using a brass bar or an equivalent tool to hold the front axle, install the hub bolt by tightening the nut.

  6. INSTALL FRONT DISC

    Click here

  7. INSTALL DISC BRAKE CYLINDER ASSEMBLY LH

    Click here

  8. INSTALL FRONT FLEXIBLE HOSE

    Click here

  9. INSTALL FRONT WHEEL

    Torque:
    103 N*m  { 1050 kgf*cm, 76 ft.*lbf }