FRONT DIFFERENTIAL OIL SEAL REPLACEMENT

PROCEDURE


  1. REMOVE REAR ENGINE UNDER COVER LH

    Click here

  2. REMOVE REAR ENGINE UNDER COVER RH

    Click here

  3. DRAIN CONTINUOUSLY VARIABLE TRANSAXLE FLUID


    1. A0057UD

      Remove the refill plug and gasket from the continuously variable transaxle assembly.

    2. A0059IB

      Using a 6 mm hexagon socket wrench, remove the overflow plug and gasket from the continuously variable transaxle assembly.

    3. A0053ZUE01
      Text in Illustration
      *1 No. 1 Transmission Oil Filler Tube

      Using a 6 mm hexagon socket wrench, remove the No. 1 transmission oil filler tube from the transaxle oil (CVT) pan sub-assembly.

      Tech Tips

      Removing the No. 1 transmission oil filler tube will drain all oil in the transaxle oil (CVT) pan sub-assembly.

    4. Using a 6 mm hexagon socket wrench, install the No. 1 transmission oil filler tube to the transaxle oil (CVT) pan sub-assembly.

      Torque:
      1.7 N*m  { 17 kgf*cm, 15 in.*lbf }
    5. Using a 6 mm hexagon socket wrench, temporarily install the overflow plug and gasket to the continuously variable transaxle assembly.

      Tech Tips

      Reuse the old gasket as the overflow plug will be removed again to adjust the fluid level.

    6. Temporarily install the gasket and refill plug to the continuously variable transaxle assembly.

      Tech Tips

      Reuse the old gasket as the refill plug will be removed again to adjust the fluid level.

  4. REMOVE FRONT DRIVE SHAFT ASSEMBLY

    Click here

  5. REMOVE FRONT DRIVE SHAFT OIL SEAL LH


    1. A0053M1E08

      Using SST, remove the front drive shaft oil seal LH from the continuously variable transaxle assembly.

      SST
      09308-00010
  6. REMOVE FRONT DRIVE SHAFT OIL SEAL RH


    1. A0055IME02

      Using SST, remove the front drive shaft oil seal RH from the continuously variable transaxle assembly.

      SST
      09308-00010
  7. INSTALL FRONT DRIVE SHAFT OIL SEAL LH


    1. Apply MP grease to the lip of a new front drive shaft oil seal LH.

    2. A0053RFE02
      Text in Illustration
      *a Front Drive Shaft Oil Seal Depth

      Using SST and a hammer, install the front drive shaft oil seal LH to the continuously variable transaxle assembly.

      SST
      09387-00010
      09950-70010   ( 09951-07150 )
      Standard depth
      -0.5 to 0.5 mm (-0.0197 to 0.0197 in.)

      Note


      • Be sure to install the front drive shaft oil seal LH in the correct direction.

      • Make sure to install the front drive shaft oil seal LH as specified, otherwise malfunctions such as a fluid leak will occur.

  8. INSTALL FRONT DRIVE SHAFT OIL SEAL RH


    1. Apply MP grease to the lip of a new front drive shaft oil seal RH.

    2. A0054C8E02
      Text in Illustration
      *a Front Drive Shaft Oil Seal Depth

      Using SST and a hammer, install the front drive shaft oil seal RH to the continuously variable transaxle assembly.

      SST
      09554-14010
      09950-70010   ( 09951-07100 )
      Standard depth
      -0.5 to 0.5 mm (-0.0197 to 0.0197 in.)

      Note


      • Be sure to install the front drive shaft oil seal RH in the correct direction.

      • Make sure to install the front drive shaft oil seal RH as specified, otherwise malfunctions such as a fluid leak will occur.

  9. INSTALL FRONT DRIVE SHAFT ASSEMBLY

    Click here

  10. ADD CONTINUOUSLY VARIABLE TRANSAXLE FLUID

    Click here

  11. INSPECT FOR FLUID LEAK

  12. INSTALL REAR ENGINE UNDER COVER RH

    Click here

  13. INSTALL REAR ENGINE UNDER COVER LH

    Click here