OIL PRESSURE SENSOR INSTALLATION

PROCEDURE


  1. INSTALL OIL PRESSURE SENSOR


    1. Coat the O-ring of the oil pressure sensor with Toyota Genuine CVT fluid FE.

    2. A00562DE04

      Using SST, install the oil pressure sensor.

      SST
      09326-22011
      Torque:
      without SST
      21 N*m  { 210 kgf*cm, 15 ft.*lbf }
      with SST
      16 N*m  { 159 kgf*cm, 12 ft.*lbf }

      Note


      • The "with SST" torque value is effective when using a torque wrench with a fulcrum length of 155 mm (6.10 in.).

      • The "with SST" torque value is effective when SST is parallel to the torque wrench.

    3. A0056PF

      Connect the oil pressure sensor connector.

  2. INSTALL REAR ENGINE UNDER COVER LH

    Click here

  3. INSTALL FRONT WHEEL LH

    Torque:
    103 N*m  { 1050 kgf*cm, 76 ft.*lbf }

  4. RESET MEMORY

    Tech Tips

    Perform Reset Memory (CVT initialization) when replacing the oil pressure sensor Click here.