OIL COOLER REMOVAL

PROCEDURE


  1. REMOVE RADIATOR SUPPORT OPENING COVER

    Click here

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note


    • w/ Navigation System (for HDD):

      After the ignition switch is turned off, the HDD navigation system requires approximately a minute to record various types of memory and settings. As a result, after turning the ignition switch off, wait a minute or more before disconnecting the cable from the negative (-) battery terminal.

    • When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  3. REMOVE BATTERY


    1. Disconnect the cable from the positive (+) battery terminal.

    2. Remove the bolt and loosen the nut.

    3. Remove the battery clamp.

    4. Remove the battery.

    5. Remove the battery tray.

  4. REMOVE BATTERY CARRIER

    Click here

  5. REMOVE FRONT LOWER BUMPER ABSORBER

    Click here

  6. REMOVE NO. 1 ENGINE UNDER COVER

    Click here

  7. REMOVE REAR ENGINE UNDER COVER LH

    Click here

  8. DRAIN ENGINE COOLANT

    Click here

  9. REMOVE TRANSMISSION OIL COOLER ASSEMBLY

    A0057PC

    1. Disconnect the 2 water by-pass hoses from the transmission oil cooler.

    2. A0057V4

      Remove the 3 bolts, transmission oil cooler and 2 O-rings from the continuously variable transaxle.