OIL PAN INSTALLATION

PROCEDURE


  1. INSTALL TRANSAXLE OIL PAN SUB-ASSEMBLY

    A0058BUE01

    1. Install the 3 magnets to the oil pan.

      Text in Illustration
      *1 Magnet

    2. Install a new gasket to the oil pan.

    3. A0056N6

      Install the oil pan to the transaxle with the 16 bolts.

      Torque:
      7.8 N*m  { 80 kgf*cm, 69 in.*lbf }

      Note

      Completely remove any oil or grease from the contact surface of the transaxle case and oil pan sub-assembly with gasket before installation.

  2. INSTALL NO. 1 TRANSMISSION OIL FILLER TUBE

    A0057YF

    1. Using a 6 mm socket hexagon wrench, install the No. 1 transmission oil filler tube to the oil pan.

      Torque:
      1.7 N*m  { 17 kgf*cm, 15 in.*lbf }
    2. A0053GW

      Using a 6 mm socket hexagon wrench, install a new gasket and the overflow plug to the oil pan.

      Torque:
      40 N*m  { 408 kgf*cm, 30 ft.*lbf }

  3. ADD CONTINUOUSLY VARIABLE TRANSAXLE FLUID


    1. Add continuously variable transaxle fluid Click here.

  4. INSPECT FOR OIL LEAK

  5. INSTALL REAR ENGINE UNDER COVER LH

    Click here

  6. INSTALL NO. 1 ENGINE UNDER COVER

    Click here

  7. INSTALL FRONT LOWER BUMPER ABSORBER

    Click here