SHIFT PADDLE SWITCH INSTALLATION

PROCEDURE


  1. INSTALL TRANSMISSION SHIFT SWITCH ASSEMBLY

    A0052J4E04

    1. Install the 2 shift switches and 2 brackets with the 4 screws.

      Torque:
      1.7 N*m  { 17 kgf*cm, 15 in.*lbf }
      Text in Illustration
      *1 Shift Switch
      *2 Bracket

      Note

      Make sure that the brackets are securely installed.

    2. A005546E02
      Text in Illustration
      *1 Switch Wire

      Connect the 2 switch wire connectors to the shift switches.

    3. A0057P2

      Connect the connector to the steering wheel.

    4. Attach the clamp to the steering wheel.

  2. PLACE FRONT WHEELS FACING STRAIGHT AHEAD

  3. ADJUST SPIRAL CABLE

    Click here

  4. INSTALL STEERING WHEEL ASSEMBLY

    Click here

  5. INSTALL STEERING PAD

    Click here

  6. INSTALL LOWER NO. 3 STEERING WHEEL COVER

    Click here

  7. INSTALL LOWER NO. 2 STEERING WHEEL COVER

    Click here

  8. INSPECT STEERING WHEEL CENTER POINT

  9. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  10. CLEAN SRS WARNING LIGHT


    1. Inspect the SRS warning light Click here.