PARK / NEUTRAL POSITION SWITCH REMOVAL

PROCEDURE


  1. REMOVE NO. 1 ENGINE UNDER COVER ASSEMBLY

    Click here

  2. DISCONNECT TRANSMISSION CONTROL CABLE ASSEMBLY


    1. Move the shift lever to N.

    2. A00564J

      Remove the nut and disconnect the transmission control cable assembly from the control shaft lever.

    3. Remove the clip and disconnect the transmission control cable assembly from the No. 1 transmission control cable bracket.

  3. REMOVE PARK/NEUTRAL POSITION SWITCH ASSEMBLY


    1. A005742

      Disconnect the connector.

    2. A0054XT

      Remove the nut, washer and control shaft lever from the park/neutral position switch assembly.

    3. A0055XQ

      Using a screwdriver, pry out the lock plate and remove the lock nut and lock plate from the park/ neutral position switch assembly.

      Text in Illustration
      A0054CA Pry out in this Direction
    4. A0057CY

      Remove the 2 bolts and park/neutral position switch assembly from the continuously variable transaxle assembly.