REVOLUTION SENSOR INSTALLATION

PROCEDURE


  1. INSTALL TRANSMISSION REVOLUTION SENSOR (NT)


    1. Apply Toyota Genuine CVT fluid FE to a new O-ring.

    2. Install the O-ring to the transmission revolution sensor (NT).

    3. Install the transmission revolution sensor (NT) to the continuously variable transaxle assembly with the bolt.

      Torque:
      5.4 N*m  { 55 kgf*cm, 48 in.*lbf }

    4. Connect the connector.

  2. INSTALL TRANSMISSION REVOLUTION SENSOR (NOUT)


    1. Apply Toyota Genuine CVT fluid FE to a new O-ring.

    2. Install the O-ring to the transmission revolution sensor (NOUT).

    3. Install the transmission revolution sensor (NOUT) to the continuously variable transaxle assembly with the bolt.

      Torque:
      5.4 N*m  { 55 kgf*cm, 48 in.*lbf }

    4. Connect the connector.

  3. INSTALL TRANSMISSION REVOLUTION SENSOR (NIN)


    1. Apply Toyota Genuine CVT fluid FE to a new O-ring.

    2. Install the O-ring to the transmission revolution sensor (NIN).

    3. Install the transmission revolution sensor (NIN) to the continuously variable transaxle assembly with the bolt.

      Torque:
      5.4 N*m  { 55 kgf*cm, 48 in.*lbf }

    4. Connect the connector.

  4. INSTALL BATTERY CARRIER

    Click here

  5. CONNECT RADIATOR PIPE


    1. Connect the radiator pipe to the battery carrier with the 2 bolts.

      Torque:
      19 N*m  { 189 kgf*cm, 14 ft.*lbf }

  6. INSTALL BATTERY TRAY

  7. INSTALL BATTERY

  8. INSTALL BATTERY CLAMP SUB-ASSEMBLY

    Click here

  9. INSTALL AIR CLEANER CASE SUB-ASSEMBLY

    Click here

  10. INSTALL AIR CLEANER FILTER ELEMENT SUB-ASSEMBLY


    1. Install the air cleaner filter element sub-assembly to the air cleaner case sub-assembly.

  11. INSTALL AIR CLEANER CAP SUB-ASSEMBLY

    Click here

  12. INSTALL NO. 2 CYLINDER HEAD COVER

    Click here

  13. CONNECT CABLE TO POSITIVE BATTERY TERMINAL

  14. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  15. CHECK DATA LIST

    Click here