FRONT SEATBACK HEATER(for Power Seat) INSPECTION

PROCEDURE


  1. INSPECT FRONT SEATBACK HEATER ASSEMBLY (for LH Side)


    1. Check the front seatback heater assembly.


      1. A00536SE02
        Text in Illustration
        *a

        Component without harness connected

        (Front Seatback Heater Assembly)

        Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Condition Specified Condition
        1 - 2

        17 to 23°C

        (63 to 73°F)

        		 0.54 to 0.66 Ω

        If the result is not as specified, replace the front seatback heater assembly and separate type front seatback pad.

  2. INSPECT FRONT SEATBACK HEATER ASSEMBLY (for RH Side)


    1. Check the front seatback heater assembly.


      1. A00536SE02
        Text in Illustration
        *a

        Component without harness connected

        (Front Seatback Heater Assembly)

        Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Condition Specified Condition
        1 - 2

        17 to 23°C

        (63 to 73°F)

        		 0.54 to 0.66 Ω

        If the result is not as specified, replace the front seatback heater assembly and separate type front seatback pad.