LUMBAR SUPPORT ADJUSTER ASSEMBLY(for Power Seat) INSTALLATION

CAUTION / NOTICE / HINT

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

PROCEDURE


  1. INSTALL LUMBAR SUPPORT ADJUSTER ASSEMBLY LH

    A005324E02

    1. Attach the 2 hooks B to install the lumbar support adjuster assembly LH to the seatback spring.

      Text in Illustration
      *1 Back Sheet
      *2 Hook A
      *3 Hook B
      *4 Cable Tie

    2. Install 2 new cable ties.

    3. Return the 2 back sheets to their original positions and attach the 4 hooks A.

    4. A0052HB

      Return the wire harness to its original position as shown in the illustration.

    5. A0057TJ

      Attach the 8 hooks to install the seatback spring.

    6. A0056E8

      Connect the connector.

  2. INSTALL SEPARATE TYPE FRONT SEATBACK PAD


    1. A0054Y9

      Install the separate type front seatback pad.

    2. A00546Q

      Connect the connector.

  3. INSTALL SEPARATE TYPE FRONT SEATBACK COVER

    Click here

  4. INSTALL FRONT SEAT INNER CUSHION SHIELD LH

    Click here

  5. INSTALL FRONT SEAT CUSHION SHIELD LH WITH FRONT SEAT NO. 1 INNER CUSHION SHIELD LH

    Click here

  6. INSTALL SLIDE AND VERTICAL POWER SEAT SWITCH KNOB

    Click here

  7. INSTALL RECLINING POWER SEAT SWITCH KNOB

    Click here

  8. INSTALL FRONT SEAT ASSEMBLY

    Click here

  9. CHECK SRS WARNING LIGHT

    Click here

  10. INSPECT FRONT SEAT ASSEMBLY


    1. Check the power seat operation Click here.

    2. Check the seat heater operation.


      1. Turn the ignition switch to ON.

      2. Operate the seat heater switch on.

      3. Wait 5 minutes or more and confirm that the seat surface becomes warm.