FRONT SEATBACK HEATER(for Power Seat) INSTALLATION

CAUTION / NOTICE / HINT

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. INSTALL FRONT SEATBACK HEATER ASSEMBLY

    Note

    When replacing either the front seatback heater assembly or separate type front seatback pad due to a malfunction, be sure to replace both of them with new parts.


    1. Remove the peeling paper from a new front seatback heater assembly.

    2. A00553I

      Install the front seatback heater assembly to a new separate type front seatback pad.

  2. INSTALL SEPARATE TYPE FRONT SEATBACK PAD


    1. A0054Y9

      Install the separate type front seatback pad.

    2. A00546Q

      Connect the connector.

  3. INSTALL SEPARATE TYPE FRONT SEATBACK COVER

    Click here

  4. INSTALL FRONT SEAT INNER CUSHION SHIELD LH

    Click here

  5. INSTALL FRONT SEAT CUSHION SHIELD LH WITH FRONT SEAT NO. 1 INNER CUSHION SHIELD LH

    Click here

  6. INSTALL SLIDE AND VERTICAL POWER SEAT SWITCH KNOB

    Click here

  7. INSTALL RECLINING POWER SEAT SWITCH KNOB

    Click here

  8. INSTALL FRONT SEAT ASSEMBLY

    Click here

  9. CHECK SRS WARNING LIGHT

    Click here

  10. INSPECT FRONT SEAT ASSEMBLY


    1. Check the power seat operation Click here.

    2. Check the seat heater operation.


      1. Turn the ignition switch to ON.

      2. Operate the seat heater switch on.

      3. Wait 5 minutes or more and confirm that the seat surface becomes warm.