FRONT POWER SEAT MOTOR ASSEMBLY(for Front Vertical) INSPECTION

PROCEDURE

1. INSPECT POWER SEAT MOTOR ASSEMBLY (for Front Vertical)

   
   

   1. for LH Side:

      Check the operation of the power seat motor.

      
      

      1. Apply battery voltage to the power seat motor.

      2. 

         Text in Illustration

         *1	Adjust Screw
         *a	Component without harness connected (Power Seat Motor Assembly)
         *b	Counterclockwise
         *c	Clockwise

         Check that the adjust screw rotates smoothly as follows.

         OK
         Measurement Condition Specified Condition Battery positive (+) → 3 (UP) Battery negative (-) → 4 (DOWN) Adjust screw rotates clockwise Battery positive (+) → 4 (DOWN) Battery negative (-) → 3 (UP) Adjust screw rotates counterclockwise

         If the result is not as specified, replace the power seat motor assembly.

2. INSPECT POWER SEAT MOTOR ASSEMBLY (for Front Vertical)

   
   

   1. for RH Side:

      Check the operation of the power seat motor.

      
      

      1. Apply battery voltage to the power seat motor.

      2. 

         Text in Illustration

         *1	Adjust Screw
         *a	Component without harness connected (Power Seat Motor Assembly)
         *b	Counterclockwise
         *c	Clockwise

         Check that the adjust screw rotates smoothly as follows.

         OK
         Measurement Condition Specified Condition Battery positive (+) → 4 (UP) Battery negative (-) → 3 (DOWN) Adjust screw rotates clockwise Battery positive (+) → 3 (DOWN) Battery negative (-) → 4 (UP) Adjust screw rotates counterclockwise

         If the result is not as specified, replace the power seat motor assembly.