FRONT SEAT ASSEMBLY(for Power Seat) DISASSEMBLY

CAUTION / NOTICE / HINT

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. REMOVE RECLINING POWER SEAT SWITCH KNOB


    1. B0040L9E03
      Text in Illustration
      *1 Protective Tape

      Apply protective tape around the front seat cushion shield LH.

    2. Using a screwdriver, detach the 2 claws and remove the reclining power seat switch knob.

      Tech Tips

      Tape the screwdriver tip before use.

  2. REMOVE SLIDE AND VERTICAL POWER SEAT SWITCH KNOB


    1. B0040H1E02
      Text in Illustration
      *1 Protective Tape

      Using a screwdriver, detach the 4 claws and remove the slide and vertical power seat switch knob.

      Tech Tips

      Tape the screwdriver tip before use.

  3. REMOVE FRONT SEAT CUSHION SHIELD LH WITH FRONT SEAT NO. 1 INNER CUSHION SHIELD LH


    1. B0040IH

      Detach the 2 rubber bands.

    2. B0040IY

      Remove the 2 screws and detach the 2 claws.

    3. B0040LX

      Remove the 2 screws.

    4. Pull the front seat cushion shield LH to detach the hook and remove the front seat cushion shield LH with front seat No. 1 inner cushion shield LH.

    5. B0040MJ

      for Driver Side:

      Disconnect the connector.

  4. REMOVE FRONT SEAT NO. 1 INNER CUSHION SHIELD LH


    1. B0040K2

      Detach the 2 claws and remove the front seat No. 1 inner cushion shield LH from the front seat cushion shield LH.

  5. REMOVE LUMBAR FRONT POWER SEAT SWITCH (for Driver Side)

    Click here

  6. REMOVE FRONT POWER SEAT SWITCH LH

    Click here

  7. REMOVE SEAT SLIDE POSITION SENSOR PROTECTOR (for Driver Side)


    1. B0040K4

      Remove the screw.

    2. Detach the 2 claws and 2 guides.

    3. B0040PB

      Detach the 2 clamps and disconnect the wire harness and remove the seat slide position sensor protector.

  8. REMOVE FRONT SEAT INNER BELT ASSEMBLY LH (for Driver Side)

    Click here

  9. REMOVE FRONT SEAT INNER BELT ASSEMBLY RH (for Front Passenger Side)

    Click here

  10. REMOVE FRONT SEAT INNER CUSHION SHIELD LH


    1. B0040II

      Remove the screw.

    2. Detach the hook and remove the front seat inner cushion shield LH.

  11. REMOVE SEPARATE TYPE FRONT SEAT CUSHION COVER WITH PAD


    1. B0040HL

      Detach the 2 hooks.

    2. B0040O8

      Disconnect the 2 connectors.

    3. Detach the wire harness clamp.

    4. Detach the claw and disconnect the connector.

    5. B0040IO

      Disconnect the connector.

    6. B0040LI

      for Front Passenger Side:

      Detach the claw and disconnect the connector.

    7. B0040NF

      Detach the wire harness clamp.

    8. Disconnect the connector.

      B0040FZ

    9. Detach the 6 hooks and remove the separate type front seat cushion cover with pad.

  12. REMOVE SEPARATE TYPE FRONT SEAT CUSHION COVER


    1. B0040M1

      Detach the 13 hooks and remove the separate type front seat cushion cover from the separate type front seat cushion pad.

  13. REMOVE FRONT SEAT CUSHION HEATER ASSEMBLY LH

    Click here

  14. REMOVE SEPARATE TYPE FRONT SEATBACK ASSEMBLY LH

    Tech Tips

    Perform this procedure when it is necessary to remove and reinstall or replace the separate type front seatback assembly LH.


    1. B0040JE

      Detach the 2 wire harness clamps.

    2. Detach the claw and disconnect the connector.

    3. B0040MZ

      Detach the 2 hooks.

    4. B0040FP

      Detach the 2 hooks from the bottom of the separate type front seatback cover.

    5. B0040LH

      Detach the 2 hooks.

    6. B0040JH

      Detach the 2 hooks and disconnect the 2 straps.

    7. B0040MC

      Pass the 2 straps through the 2 holes of the separate type front seatback pad to the surface.

    8. B0040Q9

      for Driver side:

      Disconnect the connector.

    9. B0040M4

      Disconnect the connector and detach the 2 wire harness clamps.

    10. B0040PE

      Using a T50 "TORX" socket wrench, remove the 4 "TORX" bolts and separate type front seatback assembly from the front seat adjuster assembly LH.

  15. REMOVE SEPARATE TYPE FRONT SEATBACK COVER


    1. B0040MZ

      Detach the 2 hooks.

    2. B0040FP

      Detach the 2 hooks from the bottom of the separate type front seatback cover.

    3. B0040LH

      Detach the 2 hooks.

    4. B0040JH

      Detach the 2 hooks and disconnect the 2 straps.

    5. B0040MC

      Pass the 2 straps through the 2 holes of the separate type front seatback pad to the surface.

    6. B0040MPE02
      Text in Illustration
      *1 Strap

      Remove the 5 hog rings from the center of the separate type front seatback pad.

    7. B0040N4E02
      Text in Illustration
      *1 Hook
      *2 Hog Ring

      Detach the 2 hooks.

    8. Remove the 2 hog rings.

    9. B0040OP

      Remove the 3 hog rings.

    10. B0040FG

      Remove the 3 hog rings.

    11. B0040NL

      Detach the 2 claws and remove the 2 front seat headrest supports.

    12. Remove the separate type front seatback cover.

  16. REMOVE FRONT SEATBACK HEATER ASSEMBLY LH

    Click here

  17. REMOVE SEPARATE TYPE FRONT SEATBACK PAD


    1. B0040Q3

      Remove the separate type front seatback pad.

  18. REMOVE LUMBAR SUPPORT ADJUSTER ASSEMBLY LH (for Driver Side)

    Click here

  19. REMOVE FRONT SEAT AIRBAG ASSEMBLY LH

    Click here

  20. REMOVE POWER SEAT MOTOR ASSEMBLY (for Reclining)

    Click here

  21. REMOVE SEAT CLIMATE CONTROL CONTROLLER LH


    1. B0040KD

      Detach the claw and remove the seat climate control controller LH.

  22. REMOVE POSITION CONTROL ECU ASSEMBLY (for Driver Side)


    1. B0040PX

      Disconnect the 2 connectors.

    2. Remove the 2 bolts and position control ECU assembly.

  23. REMOVE FRONT SEAT WIRE LH


    1. B0040KT

      Disconnect the connector and detach the 2 wire harness clamps.

    2. Disconnect the 3 connectors.

      B0040O1

    3. Detach the 3 wire harness clamps.

    4. Detach the claw and remove the front seat wire LH.

  24. REMOVE FRONT SEAT LOWER CUSHION SHIELD LH (for Driver Side)


    1. B0040P6

      Remove the screw.

    2. Detach the guide and remove the front seat lower cushion shield LH.

  25. REMOVE FRONT SEAT LOWER CUSHION SHIELD RH (for Front Passenger Side)

    Tech Tips

    Use the same procedure described for the front seat lower cushion shield LH.

  26. REMOVE FRONT SEAT BELT INNER ANCHOR BRACKET COVER RH (for Front Passenger Side)


    1. B0040QN

      Remove the screw.

    2. Detach the guide and remove the front seat belt inner anchor bracket cover RH

  27. REMOVE FRONT SEAT ADJUSTER ASSEMBLY LH


    1. B0040LJ

      Using a T50 "TORX" socket wrench, remove the 4 "TORX" bolts and front seat adjuster assembly LH.

  28. REMOVE SEPARATE TYPE FRONT SEAT CUSHION SPRING ASSEMBLY


    1. B0040GO

      for Front Passenger Side:

      Detach the 2 clamps and remove the connector holder.

    2. B0040FL

      Detach the 8 hooks and remove the separate type front seat cushion spring assembly from the front seat adjuster assembly LH.

  29. REMOVE POWER SEAT MOTOR ASSEMBLY (for Front Vertical)

    Click here

  30. REMOVE POWER SEAT MOTOR ASSEMBLY (for Rear Lifter)

    Click here

  31. REMOVE REAR UPPER SEAT TRACK COVER


    1. B0040PH

      Detach the 3 claws and remove the rear upper seat track cover.

  32. REMOVE REAR UPPER NO. 2 SEAT TRACK COVER


    1. B0040F2

      Detach the 3 claws and remove the rear upper No. 2 seat track cover.

  33. REMOVE SEAT POSITION AIRBAG SENSOR

    Click here