FRONT SEAT ASSEMBLY(for Power Seat) DISASSEMBLY

CAUTION / NOTICE / HINT

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. REMOVE RECLINING POWER SEAT SWITCH KNOB


    1. B0040L9E03
      Text in Illustration
      *1 Protective Tape

      Apply protective tape around the front seat cushion shield LH.

    2. Using a screwdriver, detach the 2 claws and remove the reclining power seat switch knob.

      Tech Tips

      Tape the screwdriver tip before use.

  2. REMOVE SLIDE AND VERTICAL POWER SEAT SWITCH KNOB


    1. B0040H1E02
      Text in Illustration
      *1 Protective Tape

      Using a screwdriver, detach the 4 claws and remove the slide and vertical power seat switch knob.

      Tech Tips

      Tape the screwdriver tip before use.

  3. REMOVE FRONT SEAT CUSHION SHIELD LH WITH FRONT SEAT NO. 1 INNER CUSHION SHIELD LH


    1. A00591J

      Detach the 2 rubber bands.

    2. B0040IY

      Remove the 2 screws and detach the 2 claws.

    3. B0040LX

      Remove the 2 screws.

    4. Pull the front seat cushion shield LH to detach the hook and remove the front seat cushion shield LH with front seat No. 1 inner cushion shield.

    5. B0040MJ

      for Driver Side:

      Disconnect the connector.

  4. REMOVE FRONT SEAT NO. 1 INNER CUSHION SHIELD LH


    1. B0040K2

      Detach the 2 claws and remove the front seat No. 1 inner cushion shield from the front seat cushion shield LH.

  5. REMOVE LUMBAR FRONT POWER SEAT SWITCH (for Driver Side)

    Click here

  6. REMOVE FRONT POWER SEAT SWITCH

    Click here

  7. REMOVE FRONT SEAT INNER CUSHION SHIELD LH


    1. B0040IJE02
      Text in Illustration
      *1 Hook
      *2 Wire Harness Clamp

      Remove the 2 screws.

    2. Pull the front seat inner cushion shield LH to detach the hook and remove it.

    3. Detach the wire harness clamp.

  8. REMOVE FRONT SEAT INNER BELT ASSEMBLY LH

    Click here

  9. REMOVE SEAT CUSHION COVER WITH PAD


    1. A0059CZ

      Disconnect the connector.

    2. A0054BM

      Cut off the cable tie.

    3. A00581E

      for Front Passenger Side:

      Detach the 2 hooks and disconnect the connector holder.

    4. A0054WN

      for Driver Side:

      Detach the wire harness clamp.

    5. Disconnect the 2 connectors.

      A0058PQ

    6. Detach the hooks and remove the seat cushion cover with pad.

  10. REMOVE SEPARATE TYPE FRONT SEAT CUSHION COVER


    1. A00590Z

      Detach the hooks and remove the separate type front seat cushion cover from the separate type front seat cushion pad.

      Note


      • As the front seat cushion heater assembly is affixed to the separate type front seat cushion pad, do not remove the front seat cushion heater assembly from the separate type front seat cushion pad.

      • When replacing either the front seat cushion heater assembly or separate type front seat cushion pad due to a malfunction, be sure to replace both of them with new parts.

  11. REMOVE POWER SEAT MOTOR ASSEMBLY (for Front Vertical)

    Click here

  12. REMOVE POWER SEAT MOTOR ASSEMBLY (for Rear Lifter)

    Click here

  13. REMOVE SEPARATE TYPE FRONT SEATBACK ASSEMBLY LH

    Tech Tips

    Perform this procedure when it is necessary to remove and reinstall or replace the separate type front seatback assembly LH.


    1. Detach the 2 hooks.

      A0054MU
    2. B0040FP

      Detach the 2 hooks from the bottom of the separate type front seatback cover.

    3. A0056UF

      Detach the 2 hooks and disconnect the 2 straps.

    4. B0040MC

      Pass the 2 straps through the 2 holes of the separate type front seatback pad to the surface.

    5. A0053L0

      Detach the wire harness clamp.

    6. A00557W

      for Driver Side:

      Disconnect the 2 connectors and detach the wire harness clamp.

    7. A00566B

      for Front Passenger Side:

      Disconnect the connector and detach the wire harness clamp.

    8. B0040ICE02
      Text in Illustration
      *1 Seatback Cover Bracket

      Remove the screw and detach the seatback cover bracket.

    9. B0040GIE01
      Text in Illustration
      *1 Hook
      *2 Hog Ring

      Remove the hog rings and detach the 3 hooks from the center of the separate type front seatback pad.

    10. A0056MF

      Detach the 7 hooks and remove the actuator shield.

    11. B0040QDE02
      Text in Illustration
      *1 Cable End
      A0057VO Pull

      Pull the cable to loosen it, and then disconnect the cable end from the active headrest lower unit.

    12. A0053IM

      Detach the 2 claws and remove the active headrest lower unit.

    13. A0058D2

      Using a screwdriver, detach the 2 claws and disconnect the cable.

    14. B0040HHE02
      Text in Illustration
      *1 Hook
      *2 Hog Ring

      Remove the hog ring and detach the 2 hooks and open the seatback mat.

    15. A0058RD

      Cut off the cable tie.

    16. B0040NKE02
      Text in Illustration
      *1 Cable End

      Push the cable to push out the cable end from the clip.

    17. A0057YK

      Detach the 2 claws and remove the clip.

    18. A00558Q

      Pull the cable through the hole of the seatback frame.

    19. B0040J7E02
      Text in Illustration
      *1 Protective Tape

      Using a screwdriver, push the headrest support lock to release the lock and remove the front seat headrest assembly.

      Tech Tips

      Tape the screwdriver tip before use.

    20. A0059A0

      Detach the connector.

    21. A0058QT

      Detach the 4 wire harness clamps.

    22. A00544P

      Using a T50 "TORX" socket wrench, remove the 4 "TORX" bolts and separate type front seatback assembly LH from the front seat adjuster assembly LH.

  14. REMOVE SEPARATE TYPE FRONT SEATBACK COVER


    1. Detach the 2 hooks.

      A0054MU
    2. B0040FP

      Detach the 2 hooks from the bottom of the separate type front seatback cover.

    3. A0056UF

      Detach the 2 hooks and disconnect the 2 straps.

    4. B0040MC

      Pass the 2 straps through the 2 holes of the separate type front seatback pad to the surface.

    5. B0040ICE02
      Text in Illustration
      *1 Seatback Cover Bracket

      Remove the screw and detach the seatback cover bracket.

    6. B0040GIE01
      Text in Illustration
      *1 Hook
      *2 Hog Ring

      Remove the hog rings and detach the 3 hooks from the center of the separate type front seatback pad.

    7. A0056MF

      Detach the 7 hooks and remove the actuator shield.

    8. B0040QDE02
      Text in Illustration
      *1 Cable End
      A0057VO Pull

      Pull the cable to loosen it, and then disconnect the cable end from the active headrest lower unit.

    9. A0053IM

      Detach the 2 claws and remove the active headrest lower unit.

    10. A0058D2

      Using a screwdriver, detach the 2 claws and disconnect the cable.

    11. B0040HHE02
      Text in Illustration
      *1 Hook
      *2 Hog Ring

      Remove the hog ring and detach the 2 hooks and open the seatback mat.

    12. A0058RD

      Cut off the cable tie.

    13. B0040NKE02
      Text in Illustration
      *1 Cable End

      Push the cable to push out the cable end from the clip.

    14. A0057YK

      Detach the 2 claws and remove the clip.

    15. A00558Q

      Pull the cable through the hole of the seatback frame.

    16. B0040J7E02
      Text in Illustration
      *1 Protective Tape

      Using a screwdriver, push the headrest support lock to release the lock and remove the front seat headrest assembly.

      Tech Tips

      Tape the screwdriver tip before use.

    17. A00592R

      Detach the 2 claws and remove the 2 front seat headrest supports.

    18. A0052NQ

      Detach the 2 hooks and remove the separate type front seatback cover.

  15. REMOVE SEPARATE TYPE FRONT SEATBACK PAD

    A0052TM

    1. Remove the separate type front seatback pad.

      Note


      • As the front seatback heater assembly is affixed to the separate type front seatback pad, do not remove the front seatback heater assembly from the separate type front seatback pad.

      • When replacing either the front seatback heater assembly or separate type front seatback pad due to a malfunction, be sure to replace both of them with new parts.

  16. REMOVE LUMBAR SUPPORT ADJUSTER ASSEMBLY LH

    Click here

  17. REMOVE FRONT SEAT AIRBAG ASSEMBLY LH

    Click here

  18. REMOVE POWER SEAT MOTOR ASSEMBLY (for Reclining)

    Click here

  19. REMOVE SEAT CLIMATE CONTROL CONTROLLER LH


    1. A0054PR

      Disconnect the connector.

    2. Detach the claw and remove the seat climate control controller LH.

  20. REMOVE POSITION CONTROL ECU ASSEMBLY (for Driver Side)


    1. B0040PX

      Disconnect the 2 connectors.

    2. Remove the 2 bolts and position control ECU assembly.

  21. REMOVE FRONT SEAT WIRE LH


    1. A0056H9

      Detach the wire harness clamp.

    2. A0053L0

      Detach the wire harness clamp.

    3. A0056AS

      Disconnect the connector and detach the 3 wire harness clamps.

    4. Detach the 3 claws and remove the front seat wire LH.

  22. REMOVE FRONT SEAT LOWER CUSHION SHIELD LH


    1. A0058YC

      Remove the screw and front seat lower cushion shield LH.

  23. REMOVE FRONT SEAT INNER BELT ANCHOR BRACKET COVER LH


    1. A0057JP

      Remove the screw and front seat inner belt anchor bracket cover LH.

  24. REMOVE FRONT SEAT ADJUSTER ASSEMBLY LH


    1. A0058V9

      Detach the 4 wire harness clamps.

    2. Using a T50 "TORX" socket wrench, remove the 4 "TORX" bolts and front seat adjuster assembly LH.

  25. REMOVE SEPARATE TYPE FRONT SEAT CUSHION SPRING ASSEMBLY


    1. B0040FL

      Detach the 8 hooks and remove the separate type front seat cushion spring assembly from the front seat adjuster assembly LH.

  26. REMOVE REAR UPPER SEAT TRACK COVER


    1. B0040PH

      Detach the 3 claws and remove the rear upper seat track cover.

  27. REMOVE NO. 2 REAR UPPER SEAT TRACK COVER


    1. B0040F2

      Detach the 3 claws and remove the No. 2 rear upper seat track cover.