FRONT SEAT ASSEMBLY(for Manual Seat) DISASSEMBLY

CAUTION / NOTICE / HINT

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. REMOVE VERTICAL SEAT ADJUSTER KNOB CAP (for Driver Side)


    1. B0040NXE02
      Text in Illustration
      *1 Protective Tape

      Using a screwdriver, detach the 3 claws and remove the vertical seat adjuster knob cap.

      Tech Tips

      Tape the screwdriver tip before use.

  2. REMOVE VERTICAL ADJUSTING HANDLE LH (for Driver Side)


    1. B0040JR

      Remove the 2 screws and vertical adjusting handle LH.

  3. REMOVE RECLINING ADJUSTER RELEASE HANDLE LH


    1. B0040JQE02
      Text in Illustration
      *1 Protective Tape

      Raise the reclining adjuster release handle LH to reveal the claw. Using a screwdriver, detach the claw and remove the reclining adjuster release handle LH.

      Tech Tips

      Tape the screwdriver tip before use.

  4. REMOVE FRONT SEAT CUSHION SHIELD LH


    1. B0040L6

      Detach the 2 rubber bands.

    2. B0040PA

      Remove the 2 screws.

    3. Detach the hook and claw and remove the front seat cushion shield LH.

    4. B0040NO

      w/ Lumbar Support:

      Disconnect the connector.

  5. REMOVE LUMBAR FRONT POWER SEAT SWITCH (w/ Lumbar Support)

    Click here

  6. REMOVE SEAT SLIDE POSITION SENSOR PROTECTOR (for Driver Side)


    1. B0040K4

      Remove the screw.

    2. Detach the 2 claws and 2 guides.

    3. B0040PB

      Detach the 2 clamps and disconnect the wire harness and remove the seat slide position sensor protector.

  7. REMOVE FRONT SEAT INNER BELT ASSEMBLY LH (for Driver Side)

    Click here

  8. REMOVE FRONT SEAT INNER BELT ASSEMBLY RH (for Front Passenger Side)

    Click here

  9. REMOVE FRONT SEAT INNER CUSHION SHIELD LH


    1. B0040II

      Remove the screw.

    2. Detach the hook and remove the front seat inner cushion shield LH.

  10. REMOVE RECLINING CONTROL LEVER LH


    1. B0040GB

      Detach the 2 hooks and remove the spring.

    2. B0040MNE02
      Text in Illustration
      *1 Nut A
      *2 Nut B

      Remove the nut A.

    3. Using a 15 mm socket wrench, remove the nut B and reclining control lever LH.

  11. REMOVE FRONT OUTER SEAT CUSHION BRACKET (for Driver Side)


    1. B0040I5E02
      Text in Illustration
      *1 Connector Link

      Remove the clip and disconnect the connector link.

    2. B0040LME02
      Text in Illustration
      *1 Protective Tape

      Using a screwdriver, detach the 2 claws and remove the front outer seat cushion bracket with connector link.

      Tech Tips

      Tape the screwdriver tip before use.

    3. B0040KG

      Using a screwdriver, detach the 4 claws and remove the front seat hinge pin and front outer seat cushion bracket from the connector link.

      Tech Tips

      Tape the screwdriver tip before use.

  12. REMOVE SEPARATE TYPE FRONT SEAT CUSHION COVER WITH PAD


    1. B0040P2

      Detach the 2 hooks.

    2. w/ Seat Heater System:


      1. B0040J9

        for Type A:

        Disconnect the 2 connectors.

      2. B0040IQ

        for Type B:

        Disconnect the connector.

      3. Detach the wire harness clamp.

      4. Detach the claw and disconnect the connector.

      5. B0040NH

        Disconnect the connector.

    3. B0040LI

      for Front Passenger Side:

      Detach the claw and disconnect the connector.

    4. B0040JO

      w/ Lumbar Support:

      Detach the wire harness clamp.

    5. Detach the 9 hooks and remove the separate type front seat cushion cover with pad.

      B0040JF

  13. REMOVE SEPARATE TYPE FRONT SEAT CUSHION COVER


    1. B0040M1

      Detach the 13 hooks and remove the separate type front seat cushion cover from the separate type front seat cushion pad.

  14. REMOVE FRONT SEAT CUSHION HEATER ASSEMBLY LH (w/ Seat Heater System)

    Click here

  15. REMOVE SEPARATE TYPE FRONT SEATBACK ASSEMBLY

    Tech Tips

    Perform this procedure when it is necessary to remove and reinstall or replace the separate type front seatback assembly.


    1. B0040PY

      Detach the 2 wire harness clamps.

    2. Detach the claw and disconnect the connector.

    3. B0040JU

      Detach the 2 hooks.

    4. w/ Lumbar Support:


      1. B0040P1

        Detach the hook from the bottom of the separate type front seatback cover.

      2. B0040LH

        Detach the 2 hooks.

      3. B0040JH

        Detach the 2 hooks and disconnect the 2 straps.

      4. B0040MC

        Pass the 2 straps through the 2 holes of the separate type front seatback pad to the surface.

      5. B0040I4

        Disconnect the connector.

      6. Detach the 2 wire harness clamps.

    5. B0040M7

      Using a T50 "TORX" socket wrench, remove the 4 "TORX" bolts and separate type front seatback assembly from the front seat adjuster assembly LH.

  16. REMOVE SEPARATE TYPE FRONT SEATBACK COVER


    1. B0040JU

      Detach the 2 hooks.

    2. B0040P1

      Detach the hook from the bottom of the separate type front seatback cover.

    3. B0040LH

      Detach the 2 hooks.

    4. B0040JH

      Detach the 2 hooks and disconnect the 2 straps.

    5. B0040MC

      Pass the 2 straps through the 2 holes of the separate type front seatback pad to the surface.

    6. B0040MPE02
      Text in Illustration
      *1 Strap

      Remove the 5 hog rings.

    7. B0040N4E02
      Text in Illustration
      *1 Strap
      *2 Hog Ring

      Detach the 2 hooks.

    8. Remove the 2 hog rings.

    9. B0040OP

      Remove the 3 hog rings.

    10. B0040FG

      Remove the 3 hog rings.

    11. B0040NL

      Detach the 2 claws and remove the 2 front seat headrest supports.

    12. Remove the separate type front seatback cover.

  17. REMOVE FRONT SEATBACK HEATER ASSEMBLY LH

    Click here

  18. REMOVE SEPARATE TYPE FRONT SEATBACK PAD


    1. B0040Q3

      Remove the separate type front seatback pad.

  19. REMOVE LUMBAR SUPPORT ADJUSTER ASSEMBLY LH (w/ Lumbar Support)

    Click here

  20. REMOVE FRONT SEAT AIRBAG ASSEMBLY LH

    Click here

  21. REMOVE SEAT CLIMATE CONTROL CONTROLLER LH (w/ Seat Heater System)


    1. B0040KD

      Detach the claw and remove the seat climate control controller LH.

  22. REMOVE FRONT SEAT WIRE LH (w/ Lumbar Support)


    1. B0040GV

      Detach the 2 wire harness clamps.

    2. B0040IT

      Detach the 2 wire harness clamps.

    3. Disconnect the connector.

    4. Detach the claw and remove the front seat wire LH.

  23. REMOVE FRONT SEAT LOWER CUSHION SHIELD LH (for Driver Side)


    1. B0040P6

      Remove the screw.

    2. Detach the guide and remove the front seat lower cushion shield LH

  24. REMOVE FRONT SEAT ADJUSTER ASSEMBLY LH


    1. B0040GQ

      Using a T50 "TORX" socket wrench, remove the 4 "TORX" bolts and front seat adjuster assembly LH.

  25. REMOVE SEPARATE TYPE FRONT SEAT CUSHION SPRING ASSEMBLY


    1. B0040GO

      for Front Passenger Side:

      Detach the 2 clamps and remove the connector holder.

    2. B0040M0

      Detach the 8 hooks and remove the separate type front seat cushion spring assembly from the front seat adjuster assembly LH.

  26. REMOVE REAR UPPER SEAT TRACK COVER


    1. B0040G9

      Detach the 3 claws and remove the rear upper seat track cover.

  27. REMOVE REAR UPPER NO. 2 SEAT TRACK COVER


    1. B0040GE

      Detach the 3 claws and remove the rear upper No. 2 seat track cover.

  28. REMOVE SEAT POSITION AIRBAG SENSOR (for Driver Side)

    Click here