AIRBAG CUT-OFF SWITCH INSPECTION

PROCEDURE


  1. INSPECT AIRBAG CUTOFF SWITCH CYLINDER SUB-ASSEMBLY


    1. A00591GE02
      Text in Illustration
      *a

      Component without harness connected

      (Airbag Cutoff Switch Cylinder Sub-assembly)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Switch Condition Specified Condition
      D20-1 (PMC-) - D20-2 (PMC+) Airbag cut off switch cylinder sub-assembly in ON 360 to 440 Ω
      Airbag cut off switch cylinder sub-assembly in OFF 90 to 110 Ω

      If the result is not as specified, replace the airbag cutoff switch cylinder sub-assembly.