SEAT POSITION SENSOR REMOVAL

PROCEDURE


  1. PRECAUTION

    CAUTION:

    Wear protective gloves. Sharp areas on the parts may injure your hands.

    Tech Tips


    • Use the same procedure for RHD and LHD vehicles.

    • The procedure listed below is for LHD vehicles.

  2. REMOVE FRONT SEAT ASSEMBLY LH

    for Manual Seat: Click here

    for Power Seat: Click here

  3. REMOVE SEAT SLIDE POSITION SENSOR PROTECTOR

    for Manual Seat: Click here

    for Power Seat: Click here

  4. REMOVE SEAT POSITION AIRBAG SENSOR


    1. B0040K1

      Disconnect the connector.

    2. Using a T30 "TORX" socket, remove the "TORX" bolt and seat position airbag sensor.

      Note

      The "TORX" bolt must not be reused.