PRE-CRASH SAFETY SYSTEM DIAGNOSIS SYSTEM


  1. CHECK DLC3


    1. Check the DLC3 Click here.

  2. FUNCTION OF WARNING INDICATOR AND MESSAGE


    • *1: for Multi-information Display (Monochrome Type)

    • *2: for Multi-information Display (Color Type)


    1. If the pre-crash safety system is not functioning properly, the driver is warned by the PCS warning light and a warning message on the multi-information display in the combination meter assembly.

      Master Warning Indicator Multi-information Display Detail DTC PCS Warning Light
      ON "CHECK PRE-CRASH SAFETY."*1 This message is displayed when the pre-crash safety city sensor detects a system malfunction ○ Flashes
      "Check Pre-Crash Safety."*2
      OFF

      • "PRE-CRASH SAFETY TEMPORARILY NOT AVAILABLE."*1

      • "FRONT SENSOR SYSTEMS ARE TEMP. UNAVAILABLE DUE TO INAPPROPRIATE TEMPERATURE. WAIT A MOMENT."*1

      • "FRONT SENSOR SYSTEMS ARE TEMP. UNAVAILABLE DUE TO BLOCKED VISION. CLEAN WINDSHIELD."*1

      		 These messages are displayed when the system detects that the pre-crash safety city sensor is temporarily unavailable. X Flashes

      • "Pre-Crash Safety temporarily not available."*2

      • "Front sensor systems are temporarily unavailable due to inappropriate temp. Wait a moment."*2

      • "Front sensor systems are temporarily unavailable due to blocked vision. Clean windshield."*2

    2. Initial check


      1. The initial check occurs when the ignition switch is off for more than 2 seconds, and then turned ON. The initial check consists of a pre-crash safety system diagnostic check with a duration of approximately 5 seconds.

      2. If the initial check discovers a malfunction, "CHECK PRE-CRASH SAFETY."*1 or "Check Pre-Crash Safety."*2 is displayed on the multi-information display in the combination meter assembly approximately 5 seconds after the initial check is complete and the PCS warning light blinks.

    3. Constant check


      1. The pre-crash safety city sensor constantly monitors the pre-crash safety system for malfunctions after the ignition switch is turned to ON and the initial check (approximately 5 seconds) has completed.

      2. "CHECK PRE-CRASH SAFETY."*1 or "Check Pre-Crash Safety."*2 is displayed on the multi-information display in the combination meter assembly when the constant check detects malfunctions in the pre-crash safety system.