FRONT PASSENGER AIRBAG ASSEMBLY REMOVAL

PROCEDURE


  1. REMOVE UPPER INSTRUMENT PANEL SUB-ASSEMBLY


    1. Remove the upper instrument panel sub-assembly Click here.

  2. REMOVE NO. 3 HEATER TO REGISTER DUCT

    Click here

  3. REMOVE NO. 2 INSTRUMENT PANEL WIRE


    1. A0058XQE01
      Text in Illustration
      *a Connector Lock
      B0040QK Protective Tape

      Using a screwdriver, release the connector lock and disconnect the airbag connector.

      Note

      When handling the airbag connector, take care not to damage the airbag wire harness.

      Tech Tips

      Tape the screwdriver tip before use.

    2. Detach the wire harness clamp and remove the No. 2 instrument panel wire.

  4. REMOVE INSTRUMENT PANEL PASSENGER AIRBAG ASSEMBLY


    1. A0058QO

      Remove the 2 screws.

    2. Detach the 5 hooks and raise the instrument panel passenger airbag assembly in the direction indicated by the arrow shown in the illustration.

    3. A0058DJ

      Detach the 5 hooks and remove the instrument panel passenger airbag assembly.