FRONT SEAT CUSHION HEATER(for Power Seat) INSPECTION

PROCEDURE


  1. INSPECT FRONT SEAT CUSHION HEATER ASSEMBLY LH


    1. Check the front seat cushion heater assembly LH.


      1. Measure the resistance according to the value(s) in the table below.

        B0040GJC03
        *1 Connector A *2 Connector B
        *3 Connector C - -
        *a

        Component without harness connected

        (Front Seat Cushion Heater Assembly LH)

        		 - -
        Standard Resistance
        Tester Connection Condition Specified Condition
        A1 - B12 Always Below 1 Ω
        A2 - B4
        A3 - B3
        A4 - B8
        B7 - C2
        B1 - C1 20°C (68°F) 0.70 to 0.85 Ω
        B6 - B11 4.5 to 5.5 kΩ

        If the result is not as specified, replace the front seat cushion heater assembly LH.

  2. INSPECT FRONT SEAT CUSHION HEATER ASSEMBLY RH


    1. Check the front seat cushion heater assembly RH.


      1. Measure the resistance according to the value(s) in the table below.

        B0040GJC03
        *1 Connector A *2 Connector B
        *3 Connector C - -
        *a

        Component without harness connected

        (Front Seat Cushion Heater Assembly RH)

        		 - -
        Standard Resistance
        Tester Connection Condition Specified Condition
        A1 - B12 Always Below 1 Ω
        A2 - B4
        A3 - B3
        A4 - B8
        B7 - C2
        B1 - C1 20°C (68°F) 0.70 to 0.85 Ω
        B6 - B11 4.5 to 5.5 kΩ

        If the result is not as specified, replace the front seat cushion heater assembly RH.