FRONT SEAT CUSHION HEATER(for Manual Seat) INSTALLATION

CAUTION / NOTICE / HINT

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. INSTALL FRONT SEAT CUSHION HEATER ASSEMBLY LH

    Note

    When replacing either the front seat cushion heater assembly or separate type front seat cushion pad due to a malfunction, be sure to replace both of them with new parts.


    1. Remove the peeling paper from a new front seat cushion heater assembly LH.

    2. A0057DT

      Install the front seat cushion heater assembly LH to a new separate type front seat cushion pad.

  2. INSTALL SEPARATE TYPE FRONT SEAT CUSHION COVER

    Click here

  3. INSTALL SEAT CUSHION COVER WITH PAD

    Click here

  4. INSTALL FRONT SEAT INNER BELT ASSEMBLY LH

    Click here

  5. INSTALL FRONT SEAT INNER CUSHION SHIELD LH

    Click here

  6. INSTALL FRONT SEAT CUSHION SHIELD LH

    Click here

  7. INSTALL RECLINING ADJUSTER RELEASE HANDLE LH

    Click here

  8. INSTALL VERTICAL ADJUSTING HANDLE LH (for Driver Side)

    Click here

  9. INSTALL VERTICAL SEAT ADJUSTER KNOB CAP (for Driver Side)

    Click here

  10. INSTALL FRONT SEAT ASSEMBLY

    Click here

  11. CHECK SRS WARNING LIGHT

    Click here

  12. INSPECT FRONT SEAT ASSEMBLY


    1. Check the seat heater operation.


      1. Turn the ignition switch to ON.

      2. Operate the seat heater switch on.

      3. Wait 5 minutes or more and confirm that the seat surface becomes warm.

    2. Check the lumbar support operation.


      1. Operate the lumbar front power seat switch and check that the lumbar support moves in both directions.