WATER PUMP ON-VEHICLE INSPECTION

PROCEDURE


  1. REMOVE RADIATOR SUPPORT OPENING COVER

    Click here

  2. REMOVE NO. 2 CYLINDER HEAD COVER

    Click here

  3. REMOVE REAR ENGINE UNDER COVER RH

    Click here

  4. REMOVE V-RIBBED BELT

    Click here

  5. INSPECT ENGINE WATER PUMP ASSEMBLY


    1. A0054SD

      Turn the pulley and check that the engine water pump bearing moves smoothly and quietly.

      If necessary, replace the engine water pump assembly.

    2. Make sure that there are no drops of coolant on the engine water pump housing.

      If necessary, replace the engine water pump assembly.

  6. INSTALL V-RIBBED BELT

    Click here

  7. ADJUST V-RIBBED BELT

    Click here

  8. INSPECT V-RIBBED BELT

    Click here

  9. INSTALL REAR ENGINE UNDER COVER RH

    Click here

  10. INSTALL NO. 2 CYLINDER HEAD COVER

    Click here

  11. INSTALL RADIATOR SUPPORT OPENING COVER

    Click here