WATER PUMP INSTALLATION

PROCEDURE


  1. INSTALL ENGINE WATER PUMP ASSEMBLY


    1. A0052WSE03
      Text in Illustration
      *a Protrusion

      Align the protrusion of a new gasket with the cutout in the timing chain cover and install the gasket to the groove of the timing chain cover.

      Tech Tips

      Be sure to clean the contact surfaces.

    2. A0057IVE03

      Install the engine water pump to the timing chain cover with the 6 bolts.

      Torque:
      for bolt A
      26 N*m  { 260 kgf*cm, 19 ft.*lbf }
      for bolt B
      21 N*m  { 214 kgf*cm, 15 ft.*lbf }
      Standard Bolt
      Item Length
      Bolt A 35 mm (1.38 in.)
      Bolt B 25 mm (0.984 in.)

  2. INSTALL GENERATOR ASSEMBLY

    Click here

  3. INSTALL V-RIBBED BELT

    Click here

  4. INSPECT V-RIBBED BELT

    Click here

  5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  6. ADD ENGINE COOLANT

    Click here

  7. INSPECT FOR COOLANT LEAK

    Click here

  8. INSTALL REAR ENGINE UNDER COVER RH

    Click here

  9. INSTALL NO. 2 CYLINDER HEAD COVER

    Click here

  10. INSTALL RADIATOR SUPPORT OPENING COVER

    Click here