THERMOSTAT INSTALLATION

PROCEDURE


  1. INSTALL THERMOSTAT


    1. Install a new gasket to the thermostat.

    2. A00553HE01
      *1 Jiggle Valve

      Install the thermostat to the water inlet.

      Note

      The jiggle valve must be set within 10° on either side of the position shown in the illustration.

  2. INSTALL WATER INLET


    1. A0054OI

      Install the water inlet with the 2 nuts.

      Torque:
      10 N*m  { 102 kgf*cm, 7 ft.*lbf }

  3. ADD ENGINE COOLANT

    Click here

  4. INSPECT FOR COOLANT LEAK

    Click here

  5. INSTALL RADIATOR SUPPORT OPENING COVER

    Click here