INTAKE MANIFOLD INSTALLATION

PROCEDURE


  1. INSTALL ENGINE COVER JOINT


    1. Install the 2 engine cover joints.

      Torque:
      8.0 N*m  { 82 kgf*cm, 71 in.*lbf }

  2. INSTALL NO. 1 VACUUM TRANSMITTING HOSE


    1. A0056O1

      Install the vacuum transmitting hose.

  3. INSTALL INTAKE MANIFOLD


    1. w/ Stud Bolt:


      1. A0059IK

        Using an E6 "TORX" socket wrench, install the 2 stud bolts to the intake manifold.

        Torque:
        5.0 N*m  { 51 kgf*cm, 44 in.*lbf }

    2. Install the wire harness clamp bracket to the intake manifold with the bolt.

      Torque:
      15 N*m  { 153 kgf*cm, 11 ft.*lbf }
    3. A0055WZ

      Install a new gasket to the intake manifold.

    4. A00541O

      Install the intake manifold and intake manifold stay with the 5 bolts and 2 nuts.

      Torque:
      28 N*m  { 286 kgf*cm, 21 ft.*lbf }
    5. A0056SW

      Connect the fuel vapor feed hose, ventilation hose and vacuum transmitting hose.

    6. A0055YY

      Attach the 5 clamps to the intake manifold.

    7. Install the wire harness clamp bracket with the bolt.

      Torque:
      10 N*m  { 102 kgf*cm, 7 ft.*lbf }

  4. INSTALL THROTTLE BODY ASSEMBLY

    Click here

  5. INSTALL AIR CLEANER CAP SUB-ASSEMBLY

    Click here

  6. INSTALL GENERATOR ASSEMBLY

    Click here

  7. INSTALL V-RIBBED BELT

    Click here

  8. ADJUST V-RIBBED BELT

    Click here

  9. INSPECT V-RIBBED BELT

    Click here

  10. INSTALL REAR ENGINE UNDER COVER RH

    Click here

  11. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  12. INSTALL NO. 2 CYLINDER HEAD COVER

    Click here

  13. ADD ENGINE COOLANT

    Click here

  14. INSPECT FOR COOLANT LEAK

    Click here

  15. INSTALL RADIATOR SUPPORT OPENING COVER

    Click here