FUEL SENDER GAUGE ASSEMBLY INSPECTION

PROCEDURE


  1. INSPECT FUEL SENDER GAUGE ASSEMBLY


    1. A005622E02
      Text in Illustration
      *a

      Front view of wire harness connector

      (to Fuel Sender Gauge Assembly)

      Check that the float moves smoothly between F and E.

    2. Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      2 - 3 Float Level F (Upper position) 13.5 to 16.5 Ω
      Float Level E (Lower position) 405.5 to 414.5 Ω

      If the result is not as specified, replace the fuel sender gauge assembly.