SFI SYSTEM PRECAUTION


  1. INITIALIZATION

    Note


    • Perform initialization (throttle position) after replacing the throttle body assembly or cleaning any throttle body components Click here.

    • Perform initialization (throttle position) after reconnecting the battery cable or replacing the ECM Click here.

    • Perform Reset Memory (A/T initialization) when replacing the automatic transaxle assembly, engine assembly or ECM Click here.

    • If the ECM is replaced, register the ECM communication ID for the immobiliser system (refer to the Service Bulletin for Registration).

  2. EXPRESSION OF IGNITION SWITCH

    Tech Tips

    The type of ignition switch used on this model differs according to the specifications of the vehicle. The expressions listed in the table below are used in this section.

    Expression Switch Type
    Ignition Switch (Position) Engine Switch (Condition)
    Ignition switch off Off Off
    Ignition switch ON ON On (IG)
    Ignition switch on ACC ACC On (ACC)
    Engine start START Start