AIR FUEL RATIO SENSOR INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips

Perform "Inspection After Repairs" after replacing the air fuel ratio sensor Click here.

PROCEDURE


  1. INSTALL AIR FUEL RATIO SENSOR

    Tech Tips

    Perform "Inspection After Repairs" after replacing the air fuel ratio sensor Click here.


    1. A0054UXE03
      *1 Fulcrum Length

      Using SST, install the sensor to the exhaust manifold.

      SST
      09224-00010
      Torque:
      without SST
      44 N*m  { 449 kgf*cm, 32 ft.*lbf }
      with SST
      40 N*m  { 408 kgf*cm, 30 ft.*lbf }

      Tech Tips

      Use a torque wrench with a fulcrum length of 300 mm (11.8 in.).

      Note

      Do not damage the air fuel ratio sensor.

    2. A0057L9

      Connect the sensor connector and clamp.

  2. INSTALL NO. 2 CYLINDER HEAD COVER

    Click here

  3. INSTALL OUTER COWL TOP PANEL

    Click here

  4. INSTALL FRONT WIPER MOTOR AND LINK


    1. Install the front wiper motor and link Click here.