CAMSHAFT POSITION SENSOR INSTALLATION

PROCEDURE


  1. INSTALL CAMSHAFT POSITION SENSOR (for Intake Side)


    1. A0056VF

      Apply a light coat of engine oil to the O-ring of the sensor.

    2. A0052JQ

      Install the sensor with the bolt.

      Torque:
      10 N*m  { 102 kgf*cm, 7 ft.*lbf }

      Note

      Make sure that the O-ring is not cracked or does not jump out of position during installation.

    3. Connect the sensor connector.

  2. INSTALL CAMSHAFT POSITION SENSOR (for Exhaust Side)


    1. A0056VF

      Apply a light coat of engine oil to the O-ring of the sensor.

    2. A0053IQ

      Install the sensor with the bolt.

      Torque:
      10 N*m  { 102 kgf*cm, 7 ft.*lbf }

      Note

      Make sure that the O-ring is not cracked or does not jump out of position during installation.

    3. Connect the sensor connector.

  3. INSTALL NO. 2 CYLINDER HEAD COVER

    Click here