ECM INSTALLATION

PROCEDURE


  1. INSTALL ECM


    1. A0057Z8E01
      *1 for Manual Transaxle:
      *2 for CVT:

      Install the No. 1 ECM bracket and No. 2 ECM bracket to the ECM with the 4 screws.

      Torque:
      3.0 N*m  { 31 kgf*cm, 27 in.*lbf }
    2. A0056QS

      Install the ECM with the 2 bolts.

      Torque:
      13 N*m  { 127 kgf*cm, 9 ft.*lbf }

    3. Connect the 2 ECM connectors.


      1. A00571F

        Connect the 2 ECM connectors and lower the 2 levers.

        Note


        • When connecting the connectors, make sure that dirt, water or other foreign matter does not get caught between the connectors and other parts.

        • Make sure that the 2 levers are securely lowered.

    4. A0058GM

      for Manual Transaxle:

      Connect the wire harness clamp.

  2. CONNECT NO. 2 AIR CLEANER INLET


    1. A0057JV

      Connect the No. 2 air cleaner inlet to the vehicle body with the bolt.

      Torque:
      7.0 N*m  { 71 kgf*cm, 62 in.*lbf }

  3. INSTALL NO. 1 AIR CLEANER INLET


    1. A0054ZJ

      Attach the 2 claws to install the No. 1 air cleaner inlet.

    2. Install the clip.

  4. INSTALL AIR CLEANER CASE SUB-ASSEMBLY


    1. A0054O1

      Install the air cleaner case with the 3 bolts.

      Torque:
      7.0 N*m  { 71 kgf*cm, 62 in.*lbf }

    2. Attach the wire harness clamp to the air cleaner case.

  5. INSTALL AIR CLEANER CAP SUB-ASSEMBLY

    Click here

  6. INSTALL NO. 2 CYLINDER HEAD COVER

    Click here

  7. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  8. INSTALL RADIATOR SUPPORT OPENING COVER

    Click here

  9. PERFORM INITIALIZATION

    Click here

  10. RESET MEMORY (for CVT)


    1. When replacing the ECM, perform the Reset Memory procedure (initialization) Click here.