OIL PAN REMOVAL

PROCEDURE


  1. REMOVE NO. 1 ENGINE UNDER COVER

    Click here

  2. REMOVE REAR ENGINE UNDER COVER LH

    Click here

  3. REMOVE TRANSAXLE OIL (CVT) PAN SUB-ASSEMBLY


    1. A00583A

      Remove the refill plug and gasket from the continuously variable transaxle assembly.

    2. A0057N1

      Using a 10 mm hexagon socket wrench, remove the drain plug and gasket from the transaxle oil (CVT) pan sub-assembly, and drain the fluid.

    3. A00544H

      Using a 6 mm hexagon socket wrench, remove the overflow plug and gasket from the transaxle oil (CVT) pan sub-assembly.

    4. A0052DVE01
      Text in Illustration
      *1 No. 1 Transmission Oil Filler Tube

      Using a 6 mm hexagon socket wrench, remove the No. 1 transmission oil filler tube from the transaxle oil (CVT) pan sub-assembly.

      Tech Tips

      Removing the No. 1 transmission oil filler tube will drain all oil in the transaxle oil (CVT) pan sub-assembly.

    5. A0053TO

      Remove the 19 bolts, transaxle oil (CVT) pan sub-assembly and transaxle oil pan (CVT) gasket from the continuously variable transaxle assembly.

      Note

      Some fluid will remain in the transaxle oil (CVT) pan sub-assembly. Remove all the bolts, and carefully remove the transaxle oil (CVT) pan sub-assembly.

    6. Temporarily install the gasket and refill plug to the continuously variable transaxle assembly.

      Tech Tips

      Reuse the old gasket as the refill plug will be removed again to adjust the fluid level.

  4. REMOVE OIL CLEANER (CVT) MAGNET


    1. Remove the 2 oil cleaner (CVT) magnets from the transaxle oil (CVT) pan sub-assembly.

    2. Clean off any metal particles adhered to the 2 oil cleaner (CVT) magnets.

    3. A00582TE02
      Text in Illustration
      *1 Oil Cleaner (CVT) Magnet

      Clean the transaxle oil (CVT) pan sub-assembly and remove any metal particles, sludge, etc.