PARK / NEUTRAL POSITION SWITCH REMOVAL

PROCEDURE


  1. REMOVE FRONT LOWER BUMPER ABSORBER

    Click here

  2. REMOVE NO. 1 ENGINE UNDER COVER

    Click here

  3. DISCONNECT TRANSMISSION CONTROL CABLE ASSEMBLY


    1. Move the shift lever to N.

    2. A0054KD

      Remove the nut and disconnect the control cable assembly from the control shaft lever.

  4. REMOVE PARK/NEUTRAL POSITION SWITCH ASSEMBLY


    1. Disconnect the park/neutral position switch connector.

    2. A0053UX

      Remove the nut, washer and control shaft lever.

    3. A0053CPE05

      Using a screwdriver, bend the tabs of the lock plate.

    4. Remove the lock nut and lock plate.

      Text in Illustration
      *1 Lock Plate
    5. A0056VQ

      Remove the 2 bolts and pull out the park/neutral position switch to remove it.