OIL PAN REMOVAL

PROCEDURE


  1. REMOVE FRONT LOWER BUMPER ABSORBER

    Click here

  2. REMOVE NO. 1 ENGINE UNDER COVER

    Click here

  3. REMOVE REAR ENGINE UNDER COVER LH

    Click here

  4. REMOVE NO. 1 TRANSMISSION OIL FILLER TUBE


    1. A0058WU

      Using a 6 mm socket hexagon wrench, remove the overflow plug and gasket from the continuously variable transaxle assembly.

    2. A0053V4E02
      Text in Illustration
      *1 No. 1 Transmission Oil Filler Tube

      Using a 6 mm socket hexagon wrench, remove the No. 1 transmission oil filler tube from the oil pan and drain the continuously variable transaxle fluid.

  5. REMOVE TRANSAXLE OIL PAN SUB-ASSEMBLY


    1. A005425

      Remove the 19 bolts and oil pan from the transaxle.

      Note

      Some fluid will remain in the oil pan. To prevent the fluid from spilling, place a container under the oil pan, and then carefully remove all the pan bolts and oil pan assembly.

    2. Remove the gasket from the oil pan.

    3. A00565WE05
      Text in Illustration
      *1 Magnet

      Remove the 3 magnets from the oil pan.

      Note


      • Clean the oil pan and remove any metal particles, sludge, etc.

      • Clean off any metal particles that adhere to the magnets.