MANUAL TRANSAXLE OIL REPLACEMENT

PROCEDURE


  1. REMOVE ENGINE UNDER COVER


    1. A0056FY

      Remove the 8 clips and fold back the engine under cover.

      Tech Tips

      It is not necessary to fully remove the engine under cover. Partially remove it so that the oil can be replaced in a later step.

  2. REMOVE REAR ENGINE UNDER COVER LH

    Click here

  3. DRAIN MANUAL TRANSAXLE OIL


    1. A0052J5E04
      Text in Illustration
      *1 Filler Plug

      Remove the filler plug and gasket.

    2. Remove the drain plug and gasket to drain the manual transaxle oil.

    3. B0040F6
      Text in Illustration
      *2 Drain Plug

      Install a new gasket and the drain plug.

      Torque:
      45 N*m  { 459 kgf*cm, 33 ft.*lbf }

      Tech Tips

      Face the tapered side of the gasket toward the front transaxle case.

  4. ADD MANUAL TRANSAXLE OIL


    1. A0059LO

      Add oil until the oil level is within 5 mm (0.197 in.) from the bottom of the transmission filler plug opening.

      Manual Transaxle Gear Oil
      TOYOTA Genuine Manual Transmission Gear Oil LV or equivalent
      Oil Classification
      API GL-4 and SAE 75W
      Capacity
      2.4 liters (2.5 US qts, 2.1 Imp. qts)
    2. B0040Q8

      Install a new gasket and the transmission filler plug.

      Torque:
      39 N*m  { 400 kgf*cm, 29 ft.*lbf }

      Note


      • When adding transaxle oil, make sure the vehicle is level.

      • An excessively large or small amount of oil may cause problems.

      Tech Tips

      Face the tapered side of the gasket toward the front transaxle case.

  5. INSPECT FOR OIL LEAK

  6. INSTALL REAR ENGINE UNDER COVER LH

    Click here

  7. INSTALL ENGINE UNDER COVER


    1. A00544T

      Install the engine under cover with the 8 clips.