AUTOMATIC TRANSAXLE ASSEMBLY REMOVAL

PROCEDURE


  1. REMOVE ENGINE ASSEMBLY WITH TRANSAXLE


    1. Remove the engine with transaxle Click here.

  2. REMOVE STARTER ASSEMBLY

    Click here

  3. DISCONNECT WIRE HARNESS

    A005768

    1. Disconnect the park/neutral position switch connector.

    2. Disconnect the transaxle wire connector.

    3. Disconnect the 2 speed sensor connectors.

    4. Detach the 4 wire harness clamps.

  4. REMOVE GROUND CABLE


    1. Remove the bolt and detach the clamp, and remove the ground cable.

  5. REMOVE FRONT ENGINE MOUNTING BRACKET

    A0054AM

    1. Remove the 3 bolts and mounting bracket.

  6. REMOVE REAR ENGINE MOUNTING BRACKET

    A0058U6

    1. Remove the 3 bolts and mounting bracket.

  7. REMOVE ENGINE MOUNTING BRACKET LH

    A0057EH

    1. Remove the 3 bolts and mounting bracket.

  8. REMOVE OIL COOLER TUBE SUB-ASSEMBLY

    A00582K

    1. Disconnect the 2 oil cooler hoses.

    2. Remove the bolt and oil cooler tube.

  9. REMOVE DRIVE PLATE AND TORQUE CONVERTER SETTING BOLT

    A0056WK

    1. Remove the flywheel housing under cover.

    2. Turn the crankshaft to gain access to the 6 bolts and remove each bolt while holding the crankshaft pulley bolt with a wrench.

  10. REMOVE AUTOMATIC TRANSAXLE ASSEMBLY

    A0052OK

    1. Remove the 3 bolts.

    2. A0056RG

      Remove the 5 lower side mounting bolts.

    3. Remove the automatic transaxle.

  11. REMOVE TRANSMISSION OIL FILLER TUBE SUB-ASSEMBLY

    A0055P3

    1. Remove the ATF dipstick.

    2. Remove the bolt and oil filler tube.

    3. Remove the O-ring from the transmission oil filler tube.

  12. REMOVE NO. 1 TRANSMISSION CONTROL CABLE BRACKET

    A0052G1

    1. Remove the 2 bolts and No. 1 transmission control cable bracket.

  13. REMOVE SPEEDOMETER DRIVEN HOLE COVER SUB-ASSEMBLY

    A0052PS

    1. Remove the bolt and hole cover from the transaxle case.

    2. Remove the O-ring from the hole cover.

  14. REMOVE WIRE HARNESS CLAMP BRACKET

    A0053WE

    1. Remove the bolt and wire harness clamp bracket.

  15. REMOVE TRANSMISSION CONTROL CABLE SUPPORT

    A0052LU

    1. Remove the bolt and transmission control cable support.

  16. REMOVE TORQUE CONVERTER ASSEMBLY