OIL COOLER REMOVAL

PROCEDURE


  1. REMOVE RADIATOR SUPPORT OPENING COVER

    Click here

  2. PRECAUTION

    Note

    After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work Click here.

  3. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  4. REMOVE BATTERY

    Click here

  5. REMOVE BATTERY CARRIER

    Click here

  6. REMOVE FRONT LOWER BUMPER ABSORBER

    Click here

  7. REMOVE NO. 1 ENGINE UNDER COVER

    Click here

  8. REMOVE NO. 1 OIL COOLER TUBE SUB-ASSEMBLY

    A0058C1

    1. Disconnect the No. 2 oil cooler inlet hose and No. 2 oil cooler outlet hose from the No. 2 oil cooler tube sub-assembly.

    2. A0052ZP

      Disconnect the No. 1 oil cooler inlet hose and No. 1 oil cooler outlet hose from the automatic transaxle.

    3. Remove the bolt and No. 1 oil cooler tube sub-assembly.

    4. A0056JZ

      Remove the No. 1 oil cooler inlet hose, No. 1 oil cooler outlet hose, No. 2 oil cooler inlet hose and No. 2 oil cooler outlet hose.

  9. REMOVE NO. 2 OIL COOLER TUBE SUB-ASSEMBLY


    1. A00586I

      Disconnect the No. 3 oil cooler inlet hose and No. 3 oil cooler outlet hose from the radiator.

    2. Disconnect the No. 3 oil cooler inlet hose and No. 3 oil cooler outlet hose.

    3. Remove the 2 bolts and No. 2 oil cooler tube sub-assembly.